Capsule Printing Machine

Capsule

Capsule Printing Machine

Vitro Pharma Machine provides Capsule Printing Machine (Tablet printing machine) which is characterized by fast printing, high quality, and high adaptability and widely applied to axial printing on capsules and tablets that are of different specifications and types.

PART CHANGING

Feed disc and Gravure rolls are changed to suit the shape and size of the product. Feed discs can be ordered with various numbers and sizes of pocket and can be interchanged within 5 minutes. Also, Gravure rolls can be ordered with any imprint and these are matched with the pocket spacing on the feed disc. The roll changing is required just in one minute.

CAPSULE & TABLET SIZES

  • Tablet size 3.175 to 12.7mm diameter.
  • Capsule size 00 to 5 up to 25.4 mm long.
  • POWER & AIR REQUIREMENT

  • Power Supply - 230 volts for a single phase and 440 volts for 3 phases.
  • Compressed air is required 4 cm at 40 Psi
  • OPERATION

    The Operation of the Capsule Printing Machine is completely automatic. After the initial set-up, the operator replenishes tablets or capsules and ink reservoir if required. It automatically feeds, positions, meters, imprints and ejects. This operation is controlled by a toggle switch and a foot pedal.

    FEED DISCS AND GRAVURE ROLLS

    Feed discs and Gravure rolls can be ordered in any size in order to obtain the most efficient production. Discs are available in 45 pockets where a smaller the piece, the more pockets can be used and the higher the production rate. A number of pockets on the feed disc determines the spacing of the imprints etched on the gravure roll-each disc requires a matching roll. Each disc and rolls are moderately priced and quickly modified. One machine equipped with several feed discs and gravure rolls is a fully flexible printer able to mark almost any tablet or capsule the Manufacturer may wish to market.

    PRINTS ON ANY SHAPE

    Prints on almost any size or shape, on one side or both, in one color or two of either empty or filled capsules.

    Length not exceeding Estimated production per hour
    5.556 mm 90,000 To 120,000
    10.319 mm 70,000 To 95,000
    17.463 mm 45,000 To 60,000
    25.400 mm 35,000 To 48,000

    OPERATION

    Operation is completely automatic. After initial set-up, operator has to only replenish tablets or capsules and ink reservoir, when required. It automatically feeds, positions, meters, imprints and ejects. Operation is controlled by a toggle switch and a foot pedal.

    FEED DISCS AND GRAVURE ROLLS

    Feed discs and gravure rolls can be ordered in any size in order to obtain most efficient production. Discs are available in 45 pockets. The smaller the piece, the more pockets can be used and the higher the production rate. Number of pockets on the feed disc determines spacing of the imprints etched on the gravure roll-each disc requires a matching roll. However, both discs and rolls are moderately priced and quickly changed. One machine equipped with several feed discs and gravure rolls is a fully flexible printer able to mark almost any tablet or capsule the Manufacturerr may wish to market.

    PRINTS ON ANY SHAPE

    Prints on almost any size or shape, on one side or both, in one colour or two of either empty or filled capsules.

    Manufacturer, Design, Market & Servicing of Pharmaceutical Machinery, Chemical Machinery, Food Machinery, Confectionery Machinery, Dairy Industries